Create your own Beamer template

For the past couple of days, I had been searching for a tutorial that would show how to create a custom Beamer template. I found some great resources and some really great customized templates (I have listed the ones that I referred to below) but none indicated how should I go about it. There was just lines and lines of code and for someone like me, who is programmatically challenged, the task of creating my own template seemed very daunting. So I slowly started reading some of code that I found and tried to made sense of. I did eventually succeed but not entirely.

I did manage to create my own template but is relatively much simpler as compared to the ones that I saw over the internet. But this did get me started, so I am hoping that anybody who's looking for a decently documented procedure on the topic would find this post helpful. The code is relatively simple, both to understand and execute (I hope).

One of the best documents to understand Beamer is the Beamer user guide. It explains the Beamer mechanisms very well and I used it as one of the major references while preparing this template. According to the guide, Beamer presentations have five flavours of themes

1. Presentation themes - Every aspect of the presentation is detailed here. The colour, the font, the way the bullets look. The way the enumeration goes. The size and position of the logo etc.
2. Colour themes - Just of the colour details. This can be created as a separate file from the presentation theme and then later called with other presentation themes. I will explain this below. In fact, let's just enumerate the other three and jump to the explanation of how all this connects.
3. Font themes
4. Inner themes - Design the elements that are "inside" the frame like the environments, theorems, blocks etc.
5. Outer themes - Design the outer space of the frame like the headline, footline, sidebar etc. 

To create a Beamer theme we need to specifiy four types of details-- colour, font, inner, outer. These details can be mentioned in the presentation theme itself or can be created as different files and then called in the TeX document. It is actually advisable to create them as separate files since this will allow us to use these specific themes with other presentation themes as well by just calling these in the TeX document. Additionally, it is also a more efficient way of working. For example, let's say that we like the overall feel of the Pittsburgh theme but just want to change the colours from blue to black. Then we need to just create the colour theme file and call it in the TeX document. This wouldn't be possible if we had just created one file with all the details. Let's just try to create a simple theme and see how it goes.

%%%%%%%%%%-------------------------------------------%%%%%%%%%%%%

%                             File created: 9 Nov, 2011

%
% This beamer style file was created just for experminetation and learning.
% The file is pretty much self-explanatory and as of 10 Nov, 2011, pretty much bug free (This is because I really don't know what "bugs" are and/or how to find them.
% Howvere, in case you find and bugs, issues, or have any suggestions/comments, please feel free to contact me at programming-r-pro-bro.blogspot.com
%
%
%
%%%%%%%%%%-------------------------------------------%%%%%%%%%%%%


% This style file is a combination of the four files required to create the Moo beamer theme.

% 1. Inner
% 2. Outer
% 3. Color
% 4. Font
% You can directly use this file instead of the using the other theme file "beamerthemeMoo-whole.sty" and calling the 4 styles in the TeX document.




%%% Defining the preamble
\mode<presentation>
\usepackage{pgfcomp-version-0-65}
\usepackage{color}


%%%%%%%%%%%%%%
%%
%% Color theme
%%
%%%%%%%%%%%%%%




%%%%%%
% We need to define a set of colours that will be assigned to various parts of the presentation. I personally believe that Beamer already does have some great themes, so if we really want to build our own, we will have go to the tiniest of details and tweak them.
%%%%%%





%%%%%%
% LaTeX, like R, has a huge set of colours to choose from and there are many ways we can access them.
% Colours in LaTeX are provided by the xcolor pacakge that loads by default. However, the xcolor package by itself does not provide enough breadth in colours.


% More colours can be called by using the "dvipsnames" options while calling beamer in the preamble of the document, e.g., \documentclass[xolor = dvipsnames]{beamer}



% Other than that we can also blend differnt colours to achive the desired colour mix or simply use the RGB codes to call that particular color.


% For blending two colours, we need to specify the two colours (Duh-uh!) and the percentage share of the two colours in the folowing format: <color1>!<percentage of color1>!<color2>
% If percentage of color1 is specified as x%, then percentage of color2 will automatically be taken as (100 - n)%.




% Why don't we try out a few options and see for ourselves.




% Here we are defining only two colours. We are primarily only going to use the first one.

\definecolor{Ftitle}{rgb}{0, 0, 0} % (rgb - 0, 0, 0) is nothing but black

% Here, we are using "rgb" in small case and this notation for decimal values of "rgb" ranging from 0 to 1

% To specify the integer values of "RGB", ranging from 0 t0 255, we need to use the "RGB" in CAPS or UPPERCASE
% Also, the first curly braces include the name that we assign to the colour combination
\definecolor{Descitem}{RGB}{0, 0, 139}

\definecolor{StdTitle}{RGB}{26, 33, 141}
\definecolor{StdBody}{RGB}{213,24,0}

\definecolor{AlTitle}{RGB}{255, 190, 190}
\definecolor{AlBody}{RGB}{213,24,0}

\definecolor{ExTitle}{RGB}{201, 217, 217}
\definecolor{ExBody}{RGB}{213,24,0}




% Another color for the background canvas using the blending option
%\definecolor{BgShade}{red!30!white}
%%% Important note: While trying this, I found out that a colour cannot be defined this way, it can only be set or called for a particular feature using the \setbeamercolor{}{} command. We will use this below to show this.


%%%%%%
% Assign colours to different constitutens of the presentation as per the requriements.
%%%%%%



% This sets the colour of the title of the presentation and titles of all the slides in the presentation to black.
\setbeamercolor{frametitle}{fg = Ftitle}
\setbeamercolor{title}{fg = Ftitle}

% In case you choose to display the Table of Contents, or the Outline slide.
\setbeamercolor{section in toc}{fg = Ftitle}
\setbeamercolor{section in toc shaded}{fg = Ftitle}

% The colour of all the items, subitems and and subsubitems are set to black.
\setbeamercolor{item}{fg = Ftitle}
\setbeamercolor{subitem}{fg = Ftitle}
\setbeamercolor{subsubitem}{fg = Ftitle}

% This sets the color for each item heading of the description environment.
\setbeamercolor{description item}{fg = Descitem}

% NOTE: Setting the color black for all the items also sets in black for other environemnts like enumerate.

% We also need to fix the colours for captions for figures and tables.
\setbeamercolor{caption}{fg = Ftitle}
\setbeamercolor{caption name}{fg = Ftitle}

% In addition, we can also change the background colour of the slides depending on pur requirement.
% \setbeamercolor{background canvas}{bg = blue!5}
% We have commented out this command because this is just for illustrative purposes and has not been used to define the background colour of the slides.




%%%%%%
% Now, there are three types of boxes in beamer:
% 1. Simple, or standard block, which can be invoked using definition or theorem
% 2. Alert block
% 3. Example block
% We will customize all these blocks based on our requirements


% Standard block

\setbeamercolor{block title}{fg = Descitem, bg = StdTitle!15!white}

\setbeamercolor{block body}{bg = StdBody!5!white}

% Alert block

\setbeamercolor{block title alerted}{bg = AlTitle}

\setbeamercolor{block body alerted}{bg = AlBody!5!white}

% Example block

\setbeamercolor{block title example}{bg = ExTitle}

\setbeamercolor{block body example}{bg = ExBody!5!white}

%%%%%%
% And one final thing, the colour of the text
\setbeamercolor{normal text}{fg = Ftitle}






%%%%%%%%%%%%%%
%%
%% Font theme
%%
%%%%%%%%%%%%%%


%%%%%%
% Here we are using default fonts
\usefonttheme{professionalfonts}

% Font for the presentation title
\setbeamerfont{title}{size = \huge}

% Font of the frame titles
\setbeamerfont{frametitle}{size = \Large}


%%%%%%%%%%%%%%
%%
%% Inner theme
%%
%%%%%%%%%%%%%%


%%%%%%
% Here we am using the rounded theme for the overall "feel" of the presentation. You can change the specific details by editing that particular option as we have done below.
\useinnertheme{rounded}

% Instead of rounded circles, we will use triangles as the indicator for items.
\setbeamertemplate{itemize items}[triangle]

% The default option for enumerate environment removes the circles around the numbers provided by the "rounded" inner theme. Just simple numbers remain.
%\setbeamertemplate{enumerate items}[default]


%%%%%%%%%%%%%%
%%
%% Outer theme
%%
%%%%%%%%%%%%%%


%%%%%%
% The outer theme takes the most amount of effort and time to customize.


%%%%%%
% In the outer theme, we will try to do the following:
% 1. Change the headline by putting a logo and a horizontal line
% 2. Change the footline and include custom information depending on our requirements
% 3. Organize the presentation title and the frame titles


%%%%%%
% Let's start with the headline. The approach that we plan to take for the headline and footline is similar.
% We will first define a new command and then include the command in the \setbeamertemplate{} option.
% I tried a couple of approaches that would make the method more simple but could not come up with one. % In case you do find a more aesthetic approach, please do send it accross. The contact information is on the top of the page.
% First the horizontal line on the top portion of the slides
% Add a horizontal line that runs from left of the slide to the right, just below the logo.
\newcommand{\LogoLine}{%
\raisebox{-12mm}[0pt][0pt]{%
\begin{pgfpicture}{0mm}{0mm}{0mm}{0mm}
\pgfsetlinewidth{0.28mm}
\color{gray}
\pgfline{\pgfpoint{-3mm}{1mm}}{\pgfpoint{10.8cm}{1mm}}
\end{pgfpicture}}}


% Include the line that we just created in the headline
\setbeamertemplate{headline}[text line]{\LogoLine}


% Now the logo. As it turns out. I could not include the logo in the headline. If I tried to, the headline kept shifting downwards.
% Acting a little smart and lazy, I just included the logo in the right sidebar and shifted it up.
\setbeamertemplate{sidebar canvas right}{
\vspace*{3pt}\hspace*{-25pt}%
{\includegraphics[height=28pt]{moo.png}}}





%%%%%
% Now that we have changed the headline, we will need to orient the frame titles in a way that the come at the right stop just above the horizontal line.
\setbeamertemplate{frametitle}{
\vspace*{4mm}\hspace*{-2mm}\insertframetitle}


%%%%%
% Like mentioned above, we will take a similar approach to customize the footline as well and inclued FAA in it.

\newcommand{\Ffootline}{%

\insertsection % The left end of the footline

\hfill

\textit{Moo} % The center

\hfill

\insertframenumber/\inserttotalframenumber} % And the right end

\setbeamertemplate{footline}{%

\usebeamerfont{structure}

\begin{beamercolorbox}[wd=\paperwidth,ht=2.25ex,dp=1ex]{title in head/foot}%

\Tiny\hspace*{4mm} \Ffootline \hspace{4mm}

\end{beamercolorbox}}

%%%%%%

% We will also remove the navigation symbols, which I personally don't find very useful
\setbeamertemplate{navigation symbols}{}
%%%%%%
% Now the toughest part--at least for me--customizing the title page.
% Putting a logo on the title page and text beside it was quite a difficult task and to be fairly honest, my code is not effecient at all. At the very least, it is plain clumsy.
% Though it does solve the purpose (I hate to use this phrase) it is neither "neat" nor "cool".
% Anyway, let's see how we went about it.
% For the title page, we needed a logo on the left, a vertical separater line, and finally a place for the title, author, date etc.



% First, let's create the line
\newcommand{\TitleLine}{%
\raisebox{-12mm}[0pt][0pt]{%
\begin{pgfpicture}{0mm}{0mm}{0mm}{0mm}
\pgfsetlinewidth{0.10mm}
\color{gray}
\pgfline{\pgfpoint{55mm}{0mm}}{\pgfpoint{55mm}{50mm}}
\end{pgfpicture}}}



% Now let's create commands for the title etc., that we can call later

% Title
\newcommand{\MyTitle}{%
\hspace*{60mm}\vspace{-25mm}
\centering \inserttitle}

% Subtitle
\newcommand{\MySubTitle}{%
\hspace*{60mm}\vspace{-25mm}
\centering \footnotesize \textit{\insertsubtitle}}

% Author
\newcommand{\MyAuthor}{
\hspace*{60mm}\vspace{-25mm}
\centering \insertauthor}

% Institute
\newcommand{\MyInstitute}{
\hspace*{60mm}\vspace{-25mm}
\centering \footnotesize \textit{\insertinstitute}}

% Date
\newcommand{\MyDate}{
\hspace*{60mm}\vspace{-25mm}
\centering \insertdate}



% We declare the image that will be used as the logo
\pgfdeclareimage[width = 0.20\paperwidth]{big}{moo.png}



% This is quite a complicated command. We basically create a "beamercolorbox" for each field and invoke the commands that we had created earlier.

\setbeamertemplate{title page}{\TitleLine

\hspace*{11mm}\vspace*{-60mm}

\begin{beamercolorbox}[wd=0.5\paperwidth,ht=0.13\paperwidth]{Title}

\pgfuseimage{big}

\end{beamercolorbox}

%

\begin{beamercolorbox}[wd=\paperwidth,ht=0.06\paperwidth]{Title}

\usebeamerfont{Title}%

\MyTitle

\end{beamercolorbox}

%

\begin{beamercolorbox}[wd=\paperwidth,ht=0.03\paperwidth]{Title}

\usebeamerfont{Title}%

\MySubTitle

\end{beamercolorbox}

%

\begin{beamercolorbox}[wd=\paperwidth,ht=0.06\paperwidth]{Title}

\usebeamerfont{Title}%

\MyAuthor

\end{beamercolorbox}

%

\begin{beamercolorbox}[wd=\paperwidth,ht=0.03\paperwidth]{Title}

\usebeamerfont{head/foot}%

\MyInstitute

\end{beamercolorbox}

%

\begin{beamercolorbox}[wd=\paperwidth,ht=0.07\paperwidth]{Title}

\usebeamerfont{Title}%

\MyDate

\end{beamercolorbox}}

\mode

<all>

Well, this pretty much completes the creation of Moo. I will upload the Sty file, TeX file and sample pdf for direct use and references. 

Also, in case you are trying to create a more complicated theme you should definitely check out some of the resources mentioned below.

1. Most important - The Beamer user guide
2. A great repository of themes here
3. A great introduction to Beamer here
4. Some information that helped
5. Another custom theme here
6. A very good Beamer example

Hope this information helps.

The uploaded file

Style file

TeX File

PDF output

Unit root versus breaking trend: Perron's criticism

I came across an ingenious simulation by Perron during my Time-series lecture which I thought was worth sharing. The idea was to put your model to a further test of breaking trend before accepting the null of unit root. Let me try and illustrate this in simple language.

A non-stationary time series is one that has its mean changing with time. In other words, if you randomly choose a bunch of values from the series from the middle, you would end up with different values of mean for different bunches. In short there is a trend in the data which needs to be removed to make it stationary and proceed with our analysis (its far easier to work with stationary timeseries). In order to deal with non-stationary time-series one has to be careful about the kind of non-stationarity that is exhibited by the variable. Two corrections for non-stationarity include fitting

(1) Trend stationary (TS) models, which are suitable for models that have a deterministic trend and fluctuations about that deterministic trend. This can be fit by a simple z_t = a + bt + e_t where e_t ~ ARMA(p,q)

(2) Difference stationary (DS) models, which are suitable for models having a stochastic trend. The DS models are appropriate for models that have a unit root in the AR polynomial. Unit root in the AR polynomial means that the trend part in the series cannot be represented by a simple linear trend with time (a + bt). And the correct representation is (1 – B)z_t = a + e_t, where e_t is i.i.d. 

The asymptotic properties of the estimates, forecasts and forecast errors vary substantially between the TS and DS models. (For the ones interested in the algebra behind this, lecture notes of Dr. Krishnan are here) Therefore it is important for us be sure that the model belongs to the appropriate class before we fit a TS or DS model. This is the reason why the clash between the two school of thoughts has bred enormous literature and discussions on the methodology to check for unit roots. One could try and endlessly argue about these discussions but I want to illustrate the genius of Perron who criticized the idea of fitting a DS model to series that could have a structural breaks. He said that you ought to take into account the structural break before you check for the unit roots, if you don't do so, you might end up accepting the null of unit root, even when the true data generating process (DGP) is a trend stationary process. He illustrated this using a simple, but very elegant, simulation exercise. Madhav and I, along with fine-tuning on the codes provided by Utkarsh, replicated this exercise with R.

The steps involved are as follows:

(1)   Simulate 1000 series with the DGP as:

 z­­_t = u₁  + (u₂ – u₁)DU_t + bt + e_t  

where e_{t ­}are i.i.d innovations and t = 1,2,3,...100. For simplicity I have assumed b = 1 and u₁ = 0.

(2)   Assume that there is a crash at time T_b = 50 and the entire series comes down by amount u₂.

## Simulating a trend stationary model with a crash in the intercept ##

t <- c(1:100) # specifying the time

dummy <- as.numeric(ifelse(t <= 50, 0, 1)) # specifying the dummy for trend break at T = 50

z <- ts(t - 15*dummy + rnorm(100, mean = 0, sd = 3))# This is the trend stationary model with break in trend

x <- ts(t - 15*dummy) # This is just the trend line that we see in "red" in the plot below

plot(z, main = "Simulated series with break at T = 50")

lines(x, col = "red") ## Plotting a sample of the model that we have simulated

(3)   For these simulations compute the autoregressive coefficient, “rho” in the regression:

z_t = u + bt + ‘rho’z_t-1 + e_t

(4)   Plot the cumulative distribution function (c.d.f) of “rho” for different values of u₂ (crash).

## Now we will simulate the sample data above 1000 times and check for unit roots for each of these samples ##

# For simplicity we define a function to generate the "rho's" for each of the simulated series

sim <- function(crash) ## Function name "sim"

{ 

d <- ts(t - crash*dummy + rnorm(100, mean = 0, sd = 3))

## saving the simulated series in "d"

trend <- lm(d ~ t) ## remove the trend from the

simulated series

# crash in the above function refers to the value of u₂ in equation 1

res <- ar(ts(trend$residuals), order=1, aic= FALSE) ##

Fit an AR(1) model to the residue obtained after

detrending the series 

if(length(res$ar) < 1) 0 else res$ar ## Return the ar

coefficient of the fitted AR(1) model above.

}

## Generate "rho's" for different magnitude of crash by

simply using the sim() function defined above

temp1 <- replicate(n, sim(10))

temp2 <- replicate(n, sim(15))

temp3 <- replicate(n, sim(20))

temp4 <- replicate(n, sim(35))

## Sort the values of "rho", we do this to plot the CDF

as we will see shortly

temp1.1 <- sort(temp1)

temp2.1 <- sort(temp2)

temp3.1 <- sort(temp3)

temp4.1 <- sort(temp4)

y <- seq(from=0, to=1, length.out=n)## This is how I

define the y-axis of my CDF which are basically the

probabilities. 

## Plotting all the CDF of rho for different magnitude in one plot.

   plot(c(min(temp1.1), max(temp4.1)), c(0, 1), type='n',       xlab = "Rho", ylab= "Probability", main = "CDF of 'Rho' for   differnt magniturde of crashes")

   lines(temp1.1, y, type = 'l', col = 'red')

   lines(temp2.1, y, type = 'l', col = 'green')

   lines(temp3.1, y, type = 'l', col = 'blue')

   lines(temp4.1, y, type = 'l', col = 'black')

   b <- c("10 unit crash", "15 unit crash", "20 unit crash", "35 unit crash")

   legend("topleft", b , cex=0.5, col=c("red", "green", "blue", "black"), lwd=2, bty="n")

An interesting observation that we make (or rather Perron made) is that the c.d.f of our autoregressive coefficient “rho” tends more towards unity with increase in the magnitude in crash. What this means is that as the magnitude of crash increases the possibility of your accepting the (false) null of unit root increases. Why I say the false null is because I know the true DGP is a trend stationary one.

This idea of Perron was criticised on the ground that he was specifying the break point (T_b) exogenously, that is from outside the DGP. Frankly speaking I do not understand why was this taken as a criticism. I think fixing the break point exogenously was a good way of fixing it with an economic intuition and not making is a purely statistical exercise. Some researchers (I don’t understand why) termed this (simulation) illustration as a “data mining” exercise, and improved it by selecting the break point (T_b) endogenously (by Zivot and Andrews as mentioned in the lecture notes).

I would hate to impose my opinion here but I feel this was a very elegant and logical way of driving home the point that the null of unit root should be accepted for your sample if and only if your model stands the test of extreme rigour and not otherwise, and the rigour could be imposed exogenously with economic intuition too.

P.S. Perron did a similar simulation for breaking trend model, i.e where the slope of the model had a structural break. The codes would be quite similar to the ones given above, in fact it would be a good practice if you could do the similar simulation for a breaking trend. In case you do want to try but face any issues please feel free to post/email your queries.

Criticism and discussions welcome.  

Modern Portfolio Optimization Theory: The idea

We were recently given a lecture (by Dr. Susan Thomas) on Harry Markowitz portfolio optimization theory, and I was really fascinating with the noble laureate's story of how he found it difficult to convince his guide about the importance of his thesis work. Little did anyone know that his thesis would get him the most respected award in academia 35 years down the lane. Let me try and illustrate what was the basic idea behind the modern portfolio theory in simple English language. The principal task of any financial advisory firm/individual is to try and solve the capital allocation problem of an agent, meaning how much money should be invested in what asset/security to get the desired rate of return with minimum risk. Lets try and visualize this problem of capital allocation from the individuals point of view. Suppose I want a 15% p.a rate of return on my investment and there is a security in the market that gives you an expected 15% annual rate of return with some risk(sigma or standard deviation) associated with that security/asset. One way for me to achieve the desired expected return is to invest in this security take the risk(sigma) associated with this security and hope that I am awarded for the risk I took and get a 15% return in the end. However, the beauty of financial markets is that since there are so many assets/securities being traded in the market, it is possible for me to diversify my investment, in simple words, park fraction of my money with different assets in a way that gives me approximately ~ 15% return but with substantially less risk. This is referred to as "diversification" in Finance parlance. The mathematics behind the results can be easily shown, one can find the maths in the lecture slides here. Let me try and illustrate this result through empirical simulation using R.

Suppose you are in a universe of only risky assets, i.e all assets that have a positive sigma. Then what Harry Markowitz did, with mathematics, was to compute the set of Expected returns that you could achieve with minimum risk (sigma). To illustrate this result I took stock returns for these 7 random companies for about 251 days, computed their respective expected returns, and the variance-co-variance matrix of the returns. With this I have all the necessary fodder to compute the E(r) and sigma for all the possible combination of weights that I can assign between these securities, meaning all possible different combinations of parking my money among these securities.

# Map your working directory using setwd()
# Read the relevant file
r1 <- read.csv("Markowitz.csv")


mu = colMeans(r1[,-7])  ## Calculate the column means and storing in "mu", I have removed the 7th column from the data frame as I have a risk free asset's return there, I will come back to this later in the post.


bigsig = cov(r1[,-7]) ## Variance-co-variance matrix


m = nrow(bigsig)-1
w = diff(c(0,sort(runif(m)), 1)); ## Assigning random weights between 0-1 to "w" which will have the dimension = no. of securities between which you have to divide your investment.


rb = sum(w*mu); ## Creating matrix "rb" which stores the E(r)


sb = sum(w*bigsig*w); ## Creating matrix "sb" which stores sigma's


N = 2000  ## Number of different combinations of "w" you want to look at


## Simulating the different combinations of weights "w's" and storing the E(r) and sigma^2

for (j in 2:N) {

w = diff(c(0,sort(runif(m)), 1));

r = sum(w*mu); rb = rbind(rb,r); 

s = sum(w*bigsig*w); sb = rbind(sb,s); ## Note this is sigma^2 (variance)

}

d = data.frame(rb, sb); ## Merge all the E(r) and sigmas in one data.frame.

d$sb = sqrt(d$sb); ## Square root the variance to get the sigmas

plot(d$sb, d$rb, ylab="E(r)", xlab="Sigma", col="blue",  xlim = c(0.5,10), ylim = c(-0.1,0.5), main = "E(r)- sigma (With risk free asset), N = 200000")

With only Risky assets

I did this simulation for 200000 different values of weights too, for those who are curious the plot can be obtained from here.

If we close the envelope of the above mentioned points with a smooth curve (from the left hand side) we get the efficient portfolio frontier (EFF). So what the graph suggests is that one would want to choose the weights (allocations) that lie, more specifically, on the above half of the curve. It makes intuitive sense too, why would one take on more risk to get a lesser return (which is implied by the lower half of the curve). Also another observation that we can make from the above plot is that for every additional unit of returns we will have to take on an increasingly higher risk (illustrated by the upper half of the plot). This risk-return trade off graph changes its characteristics when a risk free assets comes into the picture. Lets see what happens is we incorporate the risk free asset in our data frame. Note that a risk free assets could be thought of as a government security, whose risk (sigma) is 0, hence even its co-variances with the other risky assets would be 0. The only addition to the above codes would be to replace r1[,-7] with just r1 that is include the risk free asset too.

With risk-free asset

Simulation with N = 200000 here.


Look what happened to our risk-return trade off relationship, its linear!! So its a straight line instead of a smooth curve. Meaning for every additional unit of return you will have to take a fixed additional amount of risk, which will be given by the slope of the above half of the graph. This result, which sounds to be a trivial finding, can be extended to the entire universe of assets and one can compute the optimal portfolio that will give you a desired rate of return with minimum sigma. However the implementation of this methodology in the actual world is the real challenge. Computation of E(r), sigma, getting the up to date data for all the securities or assets in the universe are some of the challenges that one would face. But nevertheless it is inspiring to see how Harry Markowitz stuck to his idea and triumphed in the end with this path breaking research that shaped the financial advisory industry as we see it now.

P.S In case you want to replicate the exercise the data can be downloaded from here.